Laser cutting & engraving
Flat parts from a DXF — steel to acrylic to koa.
Fiber laser for metal up to 10 mm, CO₂ for acrylic, wood and delrin. We read your drawing the moment you drop it: size, cut length, holes, and anything that won't cut clean.
- Fiber: steel, stainless, aluminium, brass, copper to 10 mm
- CO₂: acrylic, birch, koa, MDF, delrin
- Beds 3000 × 1500 (fiber) and 1300 × 900 (CO₂)
- Deburr, powder coat, anodise, PEM inserts
Start a laser job from $25.00 · 3–7 working days
What to send
Drawing (DXF) · .dxf
ASCII DXF, any version from R12. One part per file is easiest; we'll nest them. Layers named ENGRAVE or SCORE are etched, not cut.
Worked example
A vented enclosure lid, 220 × 140 mm, ten of them
EstimateEstimate
- Material · Aluminium 5052-H32, 1.6 mm · 0.063"308 cm² sheet per part × 10$30.40
- Cutting · fiber laser1.48 m cut · 12 pierces · ≈ 21 s per part$13.60
- Volume pricing8% off per part at 10-$3.52
- Setup & file check$15.00
Total · 10 pc$55.48
about 3 working days · $5.55 each
Computed live by the same function your job uses — from a real sample file read on the server just now.