Wiring harnesses
Sealed, labelled, tested — for boats, vans, solar and robots.
Build your harness as a table: connectors at each end, wires between them with gauge, colour and length. We check it the way Vision does — gauges against contacts, pins used twice, unsealed ends in salt air — then cut, crimp, sleeve and test every circuit.
- DEUTSCH, Weather Pack, Superseal, Micro-Fit, JST, Powerpole, MC4
- TXL wire 10–28 AWG in ten colours
- Every circuit continuity-tested
- Built for salt, sun and vibration
Start a harness job from $60.00 · 5–12 working days
What to send
Drawing or wire list (optional) · .pdf .png .jpg .jpeg .dxf .csv .xlsx .mfharness.json
A formboard drawing, a photo of the old harness, a wire list spreadsheet — or a harness from your studio projects.
Worked example
Priced from the defaults — your brief sets the real number.
EstimateEstimate
- Connectors & terminals3 ends · 4 crimps per harness × 1$9.10
- Wire · SAE J1128 TXL3.6 m of 16 AWG × 1$3.09
- Covering · Heat-shrink jacket1.8 m × 1$5.76
- Labels4 per harness$1.60
- Cut, strip, crimp & build2 circuits × 1$5.60
- Continuity test, every circuit$1.00
- Set-up & formboard$35.00
Total · 1 pc$61.15
about 6 working days
Computed live by the same function your job uses — from a real sample file read on the server just now.